What are the maintenance methods to ensure the long-term use of the loosening machine?

We all know that the equipment of the loosening machine must be optimized frequently in order to ensure the stability of operation and operation. Therefore, in addition to strengthening supervision of relevant staff, the maintenance of the machine is very important. Let's take you to learn how to optimize the equipment.

In the cleaning work of the loosening machine, it is necessary to open the protective cover on the surface of the working pressure of the machinery and equipment, open the control cabinet, and do a good job in the cleaning work. It is usually necessary to clean the bristles in the electromagnetic brake, and there are also oil stains around the pedal box that also need to be cleaned. Clean, and remove the bristles in the control cabinet.In the case of inspecting the yarn luo equipment and the supporting force device, remove the accumulation of flower hairs next to the yarn luo, and check the guide needle and yarn guide to maintain smoothness. When inspecting the equipment, be sure to check the condition of the screws falling off.

When the loosening machine is running the crop cutting and drying machine, it must wait for the normal operation of the equipment before continuing to evenly cut and drying the machine.During the work process, the condition of the motor, the noise and the ambient temperature of the bearing should be checked in time.One of the processes of personnel at work is to tie the sleeves of their clothes firmly and put on their masks and work hats.In the case of raw materials for cutting and drying machines, it is necessary to carefully check whether the raw materials contain hard objects so as not to cause damage to the equipment and endanger personal health.When solving equipment problems, it must wait for the car engine to terminate before proceeding.

The manufacturer recommends that the necessary inspections be carried out on the loosening machine. During the inspection process, carefully check whether the side supports of the machine are bent or damaged. Due to the relatively high requirements for the installation specifications and models of the side supports of the system, of course, if the side supports are damaged or the installation of parts is not in compliance, it will affect the whole process of the machine's work, so it is necessary to do a good job in the inspection, operation and maintenance of the machine, which is also a process of overhauling equipment.