What should I pay attention to in the transportation of the flowering machine?

The flowering machine is mainly used to loosen fibers, cotton, textiles and other materials. Through tearing, large pieces of tangled fibers are loosened into small pieces or bundles, and at the same time, the loosening process is accompanied by mixing and impurity removal.So do you know what you need to pay attention to in the transportation of the flowering machine?

1. Pay attention to packaging for the transportation of flowering machine equipment. Before shipment, it should be packed in a safe manner according to its nature, transportation distance, and road conditions along the way.The packaging needs to be firm and tight, and clear, standardized, and easy-to-identify signs should be made on the packaging.

2. Pay attention to loading and unloading for the transportation of large-volume flowering machine equipment. The roads, lights, signs, fire-fighting facilities, etc. at the loading and unloading site need to meet the conditions for loading and unloading.When loading and unloading crane equipment, cars should be parked in the open air, and loading and unloading workers should pay attention to their own protection and wear protective equipment.Strictly abide by the operating procedures, load and unload lightly, and it is strictly forbidden to fall, hit, roll over, weigh and invert. The goods that are afraid of moisture should be covered with tarpaulin, and the goods should be neatly stacked and tied firmly.

3. Large-scale road escorts pay attention to fire prevention, avoid fire in the transportation of dangerous goods, and use tools that do not produce sparks when loading and unloading machinery and equipment. Smoking is strictly prohibited in the carriage, and the vehicle must not be close to open flames, high temperature places, and places exposed to the sun.The ground wire should be installed when the oil tanker transporting petroleum is stopped and loaded and unloaded. When driving, the ground wire should be touched to prevent static electricity from causing a fire.

4. Transportation plan planning, pay attention to driving, and vehicles carrying heavy machinery and equipment should be equipped with signs stipulated in GB13392-92 "Signs for Vehicles Transporting Dangerous Goods by Road".The operation of automobiles strictly complies with traffic, fire protection, public security and other regulations. They should control the speed, maintain a distance from the car in front, slow down in advance in case of emergency, avoid emergency braking, and strictly prohibit overtaking in violation of regulations.

5. Pay attention to parking for factory relocation and transportation. Vehicles loaded with flowering machine equipment are not allowed to park in schools, institutions, markets, places of interest, and scenic tourist areas. If loading and unloading operations or temporary parking are required in the above-mentioned areas, protective measures should be taken and the consent of the local public security department should be obtained.People should be kept on guard when parking, and idle personnel are not allowed to approach the vehicle. Make sure that the vehicle is in the presence of people and ensure that the vehicle is away from danger.

In short, different structures make their loosening effect, mixing effect, and impurity removal effect significantly different. Therefore, different forms of flowering machines should be used on production lines with different requirements. Therefore, special attention should be paid to flowering machines during transportation.