What factors affect the loosening effect of the loosening machine?

When the loosening machine is loosened, what factors affect the effect of the loosening? As a manufacturer of the loosening machine, let Xiaobian take everyone to learn together!

1. The spacing between the needle teeth between the feeding roller and the thorn roller: This spacing should be determined according to the length of the fiber of the loosening machine. If the length of the spun fiber is long, then the spacing can be larger; if the length of the spun fiber is short, then the spacing should be smaller, and the size of the specific spacing should be controlled according to the length of the fiber and production experience.

2. The speed of the thorn roller: In production, if the speed of the thorn roller is very fast, the number of times the raw material is loosened per unit length increases, and the loosening force becomes larger accordingly, so the loosening effect is enhanced.However, with the increase of the speed of the thorn roller, the fibers are easily torn off during the high-speed rotation of the thorn roller.Therefore, in the process of loosening, especially when the fiber block is large and the loosening resistance is large, the speed of the thorn roller should not be too large.

3. The speed of the fan: The speed of the fan should be selected correctly.If it is too fast, the fiber mass will be sucked away by the fan before it can be loosened; if it is too slow, the fiber cannot be transferred in time and can easily be rubbed into fiber mass.

4. The state of the needle cloth of the needle roller: The needle cloth of the loosening machine should be very sharp, so that the fiber can be pierced well and the fiber can be loosened. The needle teeth should be smooth, and the needle surface should be flat and wear-resistant to prevent the fiber from being hooked or entangled in the tip of the needle, which cannot be transferred well.