What factors affect the effect of the flowering machine?

During the operation of the flowering machine, what factors will affect its use effect?Next, let the Shunfa machinery flowering machine manufacturer give you a brief introduction.

1. The spacing between the needle teeth between the feeding roller and the thorn roller: This spacing should be determined according to the length of the fiber spun by the flowering machine. If the length of the spun fiber is long, then the spacing can be larger. If the length of the spun fiber is short, then the spacing should be smaller. The size of the specific spacing should be controlled according to the length of the fiber and production experience.

2. The speed of the thorn roller: In production, if the speed of the thorn roller is very fast, the number of times the raw material is loosened per unit length increases, and the loosening force becomes larger accordingly, so the role of the flowering machine is increased.However, with the increase of the speed of the thorn roller, the fibers are easily torn off during the high-speed rotation of the thorn roller.Therefore, in the loosening process of the flowering machine, especially when the fiber block is large and the loosening resistance is large, the speed of the thorn roller should not be too large.

3. The speed of the fan: The speed of the fan should be selected correctly.If the fan speed of the flowering machine is too fast, the fiber block will be sucked away by the fan before it can be loosened. If it is too slow, the fiber cannot be transferred in time and can easily be rubbed into fiber blocks.

4. The state of the needle cloth of the needle roller: The needle cloth of the flowering machine should be able to puncture the fibers well and enter the fibers for loosening. The needle teeth should be smooth and the needle surface should be flat and wear-resistant to prevent the fibers from hooking and entangling at the tip of the needle, which cannot be transferred well.