Development history of flowering machine

The flowering of fiber raw materials was carried out by manual methods earlier.For example, for wool, first tear and shake the bristles with your hands, then beat with a wooden stick or use a bowstring to loosen them.For seed cotton, first separate the cotton seed from the fiber by hand, and then use a bowstring to loosen the fiber.Until the emergence of machine spinning in the 18th century, there was a need for more raw material reserves and a requirement to reduce the transportation volume of raw materials, so the loose fiber raw materials were bundled into packages, which required the search for mechanized methods of raw material loosening and impurity removal.Since then, various types of flowering and impurity removal machinery have appeared one after another.

It is mainly used to loosen fibers, cotton, textiles and other materials. Through tearing, large pieces of tangled fibers are loosened into small pieces or bundles, and at the same time, the loosening process is accompanied by mixing and impurity removal.Flowering machines are generally composed of a pair of feeding rollers or feeding rollers and an open pine xilin. The open pine xilin is equipped with corner nails or comb needles or needle cloth or porcupine beaters, and some are also equipped with working rollers and stripping rollers in the xilin.Different structures make its flowering effect, mixing effect, and impurity removal effect significantly different, so different forms of flowering machines should be used on production lines with different requirements.The loosening machine can also be selected according to the raw materials processed, and the fibers after flowering can be fed into the carding machine for processing.