What are the functions, main types and features of flowering machines?

     Various fiber raw materials for spinning, such as raw cotton, wool, chemical staple fiber, cotton, linen, polyester, rags, etc., are mostly transported into the textile factory in the form of bags. The packing density of raw materials is generally 200-650kg/m3, while the packing density of raw cotton in my country is about 330-400kg/m3. In order to spin high-quality yarn, it is necessary to loosen the raw materials, remove various impurities, and mix them evenly. The hole quality of the fiber raw material has an important influence on the quality of semi-finished products and yarns, as well as the saving of materials.

　　Flowering machineFunction: 　 is mainly used to loosen fibers, cotton, textiles and other materials. Through tearing, large entangled fibers can be loosened into small pieces or bundles. At the same time, during the loosening process, there is mixing and removal of impurities. It is generally composed of a pair of feed rollers or feed rollers and an open cylinder. The open cylinder is equipped with corner nails or comb needles or card clothing or porcupine beaters. In order to open more carefully, some of them are also equipped with work rolls and peeling rolls. Different structures make the flowering effect, mixing effect and impurity removal effect have obvious differences, so different forms of equipment should be suitable for production lines with different requirements. According to the raw material, the decoiler can also be selected, and the fiber after flowering can be sent to the carding machine for processing.

    The main types of  flowering machines are as follows: 　 Let's introduce its classification: polypropylene, polyester staple fiber, spun spun, airflow, three-tooth tube fine linen, textile waste, vacuum, doll opener, flower machine, etc. Features of  flowering machine: 　　

1. High strength, compact and reasonable structure. 　　

2. All transmission parts adopt bearing rotation, with low failure rate and stable and reliable performance. 　　

3. Using serrated rollers, the raw materials do not need to be cut, and can be fed directly. The processing capacity is large and the cleaning effect is good.