Needless to say, I don’t know, the application range of flowering machines is so wide!

    Flowering equipmentAs the main fiber loosening machine at present, our common cotton and other fiber filaments are all loosened by flowering equipment. The fiber material is more difficult to handle. It is difficult to disassemble it after knotting. Flowering equipment The fiber material can be loosened, let us understand the application range of the flowering machine together, and hope to help everyone. 　　Flowering machine application range: Due to the diversity of spinning raw materials, fiber properties and impurities, the opening process of raw materials is also different. In cotton spinning, the flowering of raw cotton is an independent process, which is carried out on the opening and cleaning machine. When the raw cotton is turned on, additional functions such as mixing, impurity removal and dust removal will be produced. In wool spinning, the opening of the top is usually combined with scouring, drying and wool blending, and a scouring dryer and a combined wool blending machine are used. 　　In silk spinning, the flowering and cleaning of fine cotton are carried out in the process of making cotton. The opening quality of various fiber raw materials mainly depends on the process. Different raw materials should adopt different process principles. For example, when processing raw cotton in cotton spinning, the process principles of loosening first and hitting later, more loosening less, reasonable blow, early fall and less breakage are adopted. 　　 When processing chemical short fibers or medium-length fibers, the chemical fiber raw materials are fluffy, free of impurities, and only contain a small amount of fiber defects. Therefore, the process principles of more carding, less beating, less rejecting, and more recycling are adopted. Combine opening and cleaning machinery and configuration technology according to the principle. Raw materials that are too tightly packed and contain too much moisture or impurities should usually be pretreated. Tightly packed raw materials should bloom in advance, or open the package first, and allow enough time to naturally loosen; raw materials with too much moisture should be dried before blooming to improve the blooming rate of the raw materials. The above is the application scope of the flowering machine for everyone. I don’t know if you have a deeper understanding of this flowering equipment? But when you use the flowering equipment, remember to clean the flowering equipment, because The reason why the fibrous material is difficult to clean, so not only must be used in accordance with the standard, but also the flowering equipment must be cleaned regularly to avoid equipment failure.