List of opener quality identification and cleaning skills

The opening machine is a very popular machine at the moment. The advantage of this machine is that the opening products are thinner and there is no knotting. With the application of this machine in recent years, it has greatly improved The quality of work, then how to distinguish its quality? How to clean it up? Following this article, let us take a closer look. 　　How to distinguish the quality of the opener: 　　 1. The type and quantity of impurities and defects in the semi-finished product. 　　2. The structure and uniformity of semi-finished products. 　　 3. The content of short fibers in semi-finished products. 　　4. The opening degree of the fiber block is expressed by the average weight of the fiber block, the weight per unit volume or the speed of the free settlement of the fiber block in the air. 　　 5. The number of spinnable fibers in the drop. In order to further improve the opening quality and yarn quality of fiber raw materials, the main development direction of the opening process is to improve the form and structure of machine parts, and widely use licker rollers, carding machines or carding rollers to divide the carding parts and increase the fiber mass. The degree of opening can improve the structure and uniformity of semi-finished products. Reinforce the pre-opening of fiber raw materials. In the kick-off process, try to play as much free ball as possible, and play less grip. Airflow and other openings and trash removal methods are used to avoid fiber damage and trash fragmentation, thereby reducing yarn defects. 　　 Machine cleaning: 　　 During the cleaning process, it is necessary to open the protective cover on the pressure surface of the machine, open the control box, and then clean. The main purpose is to clean the flower hair in the electromagnetic clutch, and the oil around the pedal box should also be cleaned, so it is necessary to clean the flower hair in the control box. When checking the leno device and tension device of the machine, it is necessary to clean the flower pile on the side of the leno, and check the guide wire and yarn guide to keep it smooth. When checking the tension, check whether the screws are loose and tighten them in time. Regarding the identification and cleaning of the quality of the delivery machine, the above article is the answer to everyone. I don’t know if I can help you in front of the screen? In recent years, the application range of this machine has become wider and wider, and everyone is using it. At that time, we must pay attention to daily maintenance, which can effectively extend the use time of this machine and reduce the use cost.